It’s always confusing to use a drawArc method in Android. The parameters Start Angle and Sweep Angle are quite confusing to understand.This post tries to explain the drawArc function and tries to clear any doubts regarding Start Angle and Sweep Angle parameters.
You will use Canvas object to invoke a drawArc function which takes four parameters.
public void drawArc (RectF oval, float startAngle, float sweepAngle, boolean useCenter, Paint paint)
Paint attribute decides the style of the Arc (Fill or Stroke etc). Oval parameter decides the shape and size of the arc. Start angle (in degrees) where the arc begins, Sweep Angle measures how long the arc will be drawn and is always measured in clockwise.
1. Arc will be drawn in clockwise direction
2. Below diagram, indicates the way drawArc assumes degrees over the layout.
3. The direction of drawing the arc can be reversed by providing negative angles.
Now it’s time for some examples to better understand how to draw an android arc between two points with respect to Start Angle and End Angle.
startAngle = 0 degrees
sweep angle = 90 degrees
In the above diagram, shaded portion is the rendered arc portion.As you can see, It starts from 0 degrees as depicted in the coordinate system, and it sweeps 90 degrees in clockwise direction.
startAngle = 90 degrees
sweep angle = 180 degrees
Below code tells you how we are able to draw four arcs starting from a Big arc from 180 start Angle to 180 Sweep Angle.Then the code draws four arcs, each starting at 45 degrees below the previous start angle.
canvas.drawArc(rect, 180, 180, false, mSectionPaint4); // draws section 3
canvas.drawArc(rect, 135 180 - sectionGap, false,mSectionPaint3); // draws section 2
canvas.drawArc(rect, 90, 180, false, mSectionPaint2); // draws section1
canvas.drawArc(rect, 45, 180, false, mSectionPaint1); // draws section 0
You can check out a Customview called ArcProgressBar from our repository here: https://bitbucket.org/pkumarad/arcprogress